BendPak's proven legacy gives you an edge in performance, service and cost of ownership.
Designed to be fastened to the floor or free-standing.
Comes standard with caster kit, drip trays, mobile jack tray, aluminum approach ramps, and hardened steel tire stops.
Boxed-steel columns are made from structural 4.75" x 4.75" welded steel tubing.
Columns feature 12" x 12" baseplates 5/8" thick.
Manual dead bolt locks are reliable and safe and are machined directly into the boxed-steel columns.
3/4" thick steel safety locks are spring loaded for automatic and solid engagement.
16 positive locking positions are spaced every 4 inches.
Secondary slack-cable lock system assures instant back-up safety lock engagement in the event of a cable failure.
Exterior steel sleeves with UHMV slides surround each column to ensure positive contact and containment.
¾” thick safety locks are securely trapped by the full-perimeter cross tube sleeves and can't become dislodged or disengaged.
Welded-steel runways feature utility rail for jack tray and drip trays and other accessories.
Runways are welded and boxed for extra strength.
Built-in flow restriction integrated into the hydraulic cylinder to prevent free-fall.
Oversize baseplates and pull-perimeter cross tube sleeves reduce lateral movement and sway when lift is free-standing.
Low profile runways are only 5" high to accommodate low ride-height vehicles.
Hardened steel safety lock linkages use 3/8" molded carbon steel rod ends to reduce flex and twist to ensure positive locking and smooth operation.
Precision, reinforced rod ends with spherical bearings are protective coated for corrosion resistance and are designed to provide low friction and high wear resistance.
5/8" thick top caps.
Sheave axles feature hardened steel collars and snap rings.
Pull out tire stops on both ends of the lift that allows drive through capability.
Stainless steel lifting cables are rated to handle over 14,000 lbs. each.
Cable keepers assures cables remain safely secure to the sheaves.
Pre-assembled cables simplifies installation.
36" aluminum approach ramps are gusseted to eliminate flex and bending.
Non-marring heavy-duty poly caster wheels will not damages painted floor surfaces.
Durable powder coat finish.
3/4" runway bolts provide positive attachment with increased safety factor.
Operator controls are simple to use, well-placed and ergonomically advanced to reduce operator strain and fatigue and increase safety.
Electric/hydraulic power system.
Single hydraulic cylinder underneath runway.
Optional full-length aluminum platforms can be added to easily store lawnmowers, ATVs, jet skis or motorcycles.
Lifting Capacity*
9,000 lbs. (4,082 kg)
*Max Capacity / Front Axle
4,500 lbs. (2,041 kg)
*Max Capacity / Rear Axle
4,500 lbs. (2,041 kg)
Lifting Capacity*
9,000 lbs. (4,082 kg)
*Max Capacity / Front Axle
4,500 lbs. (2,041 kg)
*Max Capacity / Rear Axle
4,500 lbs. (2,041 kg)
A - Min. Runway Height:
5" (127 mm)
B - Max. Rise:
82" (2,083 mm)
C - Max. Lifting Height:
87" (2,210 mm)
Time to Full Rise:
55 seconds
D - Overall Width:
114" (2,896 mm)
E - Outside Length:
200.5" (5,093 mm)
F - Overall Length:
227" (5,766 mm)
G - Height of Columns:
99" (2,515 mm)
H - Width Between Columns:
98" (2,489 mm)
I - Drive-Thru Clearance:
86" (2,184 mm)
J - Runway Width:
18.75" (476 mm)
K - Length of Runways:
189.75" (4,820 mm)
L - Width Between Runways:
37.5" (953 mm)
M - Runway Centerline:
53.75" (1,365 mm)
N - Outside Edge of Runways:
72.5" (1,842 mm)
Rated Capacity:
135" (3,429 mm)
75% Capacity:
115" (2,921 mm)
50% Capacity:
95" (2,413 mm)
25% Capacity:
80" (2,032 mm)
Locking Positions:
16
Lock Spacing:
Every 4" (102 mm)
Motor:
STANDARD: 110VAC, 50-60HZ, 1PH, 20A or OPTIONAL: 208-230VAC, 50-60HZ, 1PH, 25A
Noise:
45 dB
Weight:
2,416 lbs. (1,095.9 kg)
Dimensions:
190'' x 22'' x 35'' (4,826 mm x 558 mm x 889 mm)
14,000 pound lifting capacity
CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493
Two runway lengths to choose
Heavy‐duty turn plates and integrated rear slip‐plates included
Multi‐position turn plate pockets
Automatic leveling system
Multiple auto-leveling locking positions
Runways include rail‐kit for optional accessories
Electric / hydraulic power system
Single hydraulic cylinder mounted underneath runway
Fully enclosed lifting cables, safety locks, and sheaves
Internal "Anti-Sway" slider blocks in each column
Features oversize sheaves and heavy‐duty 1/2” aircraft cable
Rugged 1‐3/8" roller axles and oversize self‐lubricating cable sheaves
Multi‐position safety locks in each column with push‐button safety release
Runways adjust for different tread widths and feature a durable matte finish
Optional 7,000 pound capacity bridge jacks available (Model RJ7W)
Lifting Capacity 14,000 lbs. (6,350 kg)
Max Capacity / Front Axle 7,000 lbs. (3,175 kg)
Max Capacity / Rear Axle 7,000 lbs. (3,175 kg)
Min. Runway Height: 7.625" (194 mm)
Max. Rise: 70" (1,778 mm)
Max. Lifting Height: 77.625" (1,972 mm)
Time to Full Rise: 60 seconds
Overall Width: 130" (3,302 mm)
Outside Length: 213" (5,410 mm)
Overall Length: 241" (6,121 mm)
Height of Columns: 95" (2,413 mm)
Width Between Columns: 120" (3,048 mm)
Drive-Thru Clearance: 98" (2,489 mm)
Runway Width: 20" (508 mm)
Length of Runways: 199" (5,055 mm)
Width Between Runways: 37.5" (953 mm) or 51" (1,295 mm)
Min. 4-Wheel Alignment: 89" (2,261 mm)
Max. 4-Wheel Alignment: 156" (3,962 mm)
Max. 2-Wheel Alignment: 182" (4,623 mm)
Rated Capacity: 140" (3,556 mm)
75% Capacity: 120" (3,048 mm)
50% Capacity: 100" (2,540 mm)
25% Capacity: 80" (2,032 mm)
Locking Positions: 13
Lock Spacing: 4"
Weight: 3,067-lbs. (1,391 kg)
Dimensions: 209" x 23" x 42" (5,308 mm x 584 mm x 1,066 mm)
