| Details |
| NEW: Now with SmartTest - Quick alignment check with printout in under 90 seconds
- Highly automated routine
- Automatic target recognition
- Automated printout of protocol and reset for next vehicle check
Perfectly integrated in ADAS calibration and head light testing:
- The space in front of the lift can be used for the ADAS calibration jig and head light tester
- Permanent self-check and precise ADAS calibration jig orientation to the thrust vehicle's thrust angle
- No need for extra cameras, cables, clamps or targets required for ADAS calibration
Best in class: +/- 2 minute accuracy
- Sensor heads can be easily detached from the lift when not in use to clear up space
- Beissbarth DualView camera system for ultimate control, especially of complex chassis
- No fixed position for targets on the vehicle eliminates room for error
- Plug & play: no calibration required for installation or for exchanging targets
- Extensive Beissbarth vehicle database including alignment helps directly from the OEMs
- Quality Made in Germany
- Also available as Kit version; ideal for existing alignment bays
- Cable version
Scope of delivery:
- Sensor head with DualView camera technology
- +Software with SmartTest and ADAS calibration option
- Target boards
- Vehicle specs database
- Cabinet
- Brake pedal depressor and steering wheel holder
- Wall storage kit for sensor heads
Please note: lift adapter, cable set, turntables, and wheel clamps need to be ordered separately!
|
|---|
| Technical Data |
|
| Weight |
114 kg |
| Packaging unit |
1 Pallet(s) |
| Operating temperature |
5 - 40 °C |
| Power supply |
120 - 220 V | 50 - 60 Hz |
| Data transmission type |
- corded |
| Measuring system |
- 3D |
| Power |
0,5 kW |
| Storage temperature |
-20 - 60 °C |
| Packaging length |
1150 mm |
| Packaging width |
1200 mm |
| Packaging height |
1600 mm |
| Gross weight |
144 kg |
| Relative humidity, use |
(40 °C) 10 - 90 % |
| Height cabinet |
1111 mm |
| Width cabinet |
650 mm |
| Depth cabinet |
680 mm |
| Height sensor head |
130 mm |
| Width sensor head |
320 mm |
| Depth sensor head |
630 mm |
| Weight sensor head |
9,3 kg |
|
|---|
| Accessories |
|
| Vehicle database update Cars & Vans Europe | Key Card |
1 690 002 015 |
| Mechanical aluminum turntable Standard |
1 690 501 001 |
| Mechanical aluminum turntable Precision |
1 690 401 028 |
| Filling piece for aluminum turntable |
1 690 702 082 |
| Protective rubber cover for aluminum turntable |
1 690 402 001 |
| Sliding plate for rear axle | short |
1 690 401 003 |
| Sliding plate for rear axle | long |
1 690 401 004 |
| Drive-on ramps for two aluminum turntables |
1 690 701 052 |
| Drive-on ramps for turntables and sliding plates |
1 690 401 008 |
| Lift adapter extension from one to two positions |
1 690 701 503 |
| Special lift adapter for Beissbarth / Consul |
1 690 701 123 |
| Special lift adapter Extension for Beissbarth / Consul |
1 690 701 311 |
| Special lift adapter for lifts with U-profile |
1 690 701 020 |
| Floor adapter for LTB 100/300 |
1 690 701 506 |
| Floor adapter for alignment pits |
1 690 701 027 |
| Magnetic clamps for wheel bolts | 75mm |
1 690 701 508 |
| Magnetic clamps for wheel bolts | 100mm |
1 690 701 521 |
| Multi-Fit wheel clamp with standard claws | 13 - 22" | 4 pcs. |
1 690 311 112 |
| Multi-Fit wheel clamp with standard claws | 13 - 22" | 1pc. |
1 690 311 089 |
| Extension set for Multi-fit clamps | 23 - 28" |
1 690 311 113 |
| Set softline claws for 1 x Multi-fit clamp | Softline rims |
1 690 311 164 |
| Set truck claws for 1 x Multi-fit clamp | Truck |
1 690 311 115 |
| Central clamp Porsche Carrera GT |
1 690 301 002 |
| Central clamp Porsche 911 GT3 and Turbo |
1 690 380 002 |
| Self-centering quick clamp for Porsche |
1 690 380 010 |
| Self-centering quick clamp for Tesla |
1 690 380 161 |
| Self-centering quick clamp for Ferrari |
1 690 381 299 |
| Target boards 340 cm |
1 690 701 032 |
| Extension for vehicles with narrow track width (Smart) |
1 690 701 127 |
| Standard target board for Easy 3D |
1 690 711 005 |
| Special target boards for DAS calibration jig in combination with 4-post lifts |
1 690 701 152 |
| Standard target boards for DAS calibration jig |
1 690 701 119 |
| Cable set 7.5 m / 7.5 m |
1 690 701 205 |
| Cable set 12 m / 12 m |
1 690 701 029 |
| Cable set 15 m / 15 m |
1 690 701 030 |
| Cable set 25 m / 25 m |
1 690 701 163 |
| Brake pedal depressor |
1 690 401 006 |
| Steering wheel holder |
1 690 401 007 |
| Step protection for Easy 3D |
1 690 701 045 |
| Toe press bar for Mercedes Benz |
1 693 600 001 |
| Ballast bag 5 kg |
1 693 740 001 |
| Ballast bag 8 kg |
1 693 740 693 |
| Ballast bag 10 kg |
1 693 740 002 |
| Ballast bag 20 kg |
1 693 740 003 |
|
|---|
