SKU: 5175627
The QuickJack 6000TL is the standard-length portable car hoist built for the cars most people actually work on. It carries 2,722 kg — 454 kg more than the 5000TL it replaces — and lifts a vehicle to 610 mm of working height in around 30 seconds. When the job’s done, both frames wheel out and stand against the wall, and the floor space comes back.
Compare across the range:
QuickJack 6000TL Storable Car Lift
Features
Reworked hydraulic power unit — a pressure-compensated flow divider keeps both frames moving together through the whole cycle, and independent shut-off solenoids on each cylinder stop pressure drifting between sides when you pause mid-lift.
Capacity that covers the driveway — 2,722 kg takes in almost every sedan, hatch, wagon and small SUV you’re likely to own or service, with headroom left over.
Reinforced where it counts — thicker cross members, revised weld geometry and updated pivot joints hold alignment through the full range of travel.
Two locking positions — the lock bars drop in automatically as the frames rise. Once engaged, gravity holds the load; a power cut or a hydraulic leak won’t bring it down.
Sets up once, then it’s quick — the hydraulics come preassembled from the factory. After the initial setup, it’s connect the hoses and go.
Stores like nothing else that lifts this much — 76 mm collapsed, urethane wheels on each frame, and a handle opening at the label end.
Materials & Tech
Optional
| Specification | Details |
| Lifting Capacity | 2,722 kg (6,000 lbs.) |
| Lowered Height (frame only) | 76 mm (3″) |
| Lifting Height (medium blocks) | 520 mm (20.5″) |
| Lifting Height (tall blocks) | 546 mm (21.5″) |
| Max Lifting Height (stacked blocks) | 610 mm (24″) |
| Lift Time | 30 seconds |
| Frame Length | 1,778 mm (70″) |
| Frame Width | 279 mm (11″) |
| Max Lift Point Spread | 1,524 mm (60″) |
| Min Lift Point Spread | 940 mm (37″) |
| Weight (each frame) | 36 kg (79 lbs.) |
| Power Supply | 208–240 V AC, 50/60 Hz, 1 Ph, 5 A min. |
| Power Unit Weight (dry) | 12.3 kg (27.26 lbs.) |
| Safety Lock Positions | 2 (Mid-Rise & Full-Rise) |
Premier Autotune Workshop
Genesis was transparent with me, and answered all my questions, they weren't trying to sell me anything or push hoists onto me. They could see my plans and what I needed for the future for all the types of cars I service. And they provided me with solutions for what is going to work for my workshop and the future. I’m confident with Genesis Equipment and the BendPak hoists they’ve supplied me.
Allen, Owner
Enquire
